STEP 1:
You have to cut two pieces of wire that measure 8 cm or 9 cm.
STEP 2:
With the two tweezers you have you grab the wire, but first you choke the wire.
STEP 3:
with the left hand you grab the tweezers and you have to make 3 long turns.
STEP 4:
when you have it you have to make two closures on both sides.
STEP 5:
the closures are like turns but short, two turns.
MATERIAL:
1._ CALIBER GALBANIZED WIRE 16.
2._ TWO ELECTRIC CLAMPS.
THE LOOP IS USED IN AREAS AND OPEN LINES WHERE MECHANICAL RESISTANCE IS CUCA TO WINGS THAT ARE SUBJECTED.
SIMPLE DERIVATION.
Step 1:
measure and cut two conductors
Step 2:
cut and hold conductors with tweezers in left hand
Step 3:
make short or straight turns.
STEP 4: You have to make 7 or 8 short turns that are well attached.
STEP 5: You have to make sure that you wait until you try them out.
What is it for:
this branch is used in open and straight lines
SIMPLE DERIVATION.
Step 1:
measure and cut two conductors
Step 2:
cut and hold conductors with tweezers in left hand
Step 3:
make short or straight turns.
STEP 4: You have to make 7 or 8 short turns that are well attached.
STEP 5: You have to make sure that you wait until you try them out.
What is it for:
this branch is used in open and straight lines
